Office chairs and study chairs by Bluewud
A desk chair is the one piece of furniture you sit on for most of the day, so it has to hold you upright without making you stiff. Bluewud ergonomic chairs pair a mesh backrest, which lets air through, with a padded seat and a curved lumbar section that supports the lower back.
This page has 4 office chairs, from βΉ5,999 to βΉ10,299: three mid back mesh chairs and one high back chair with a headrest.
All of them swivel through 360Β° on a heavy-duty metal base with 50 mm castor wheels, rise and lower on a gas lift, and carry up to 90 kg.
Types of office chairs
Mid back mesh office chairs
The backrest ends below the shoulders, which keeps the chair light and compact. Zylo, Polli and Spyn are mid back mesh chairs.
High back chair with headrest
Flexa has a tall mesh back, an adjustable headrest for the neck and armrests that move up and down.
Ergonomic study chairs
A study chair for students needs the same things as an office chair: adjustable seat height, lumbar support and a seat that stays comfortable through a long session.
See study tables →Revolving and computer chairs
Every Bluewud desk chair is a revolving chair: it turns through 360Β° and rolls on castors, so you can reach a drawer or a printer without standing up.
Mid back or high back office chair?
A mid back chair supports the lower and middle back and suits people who sit upright and take short breaks. A high back chair also supports the shoulders, and with a headrest the neck; it suits long calls, reading and leaning back to think. Flexa is the high back option here, at 118 to 127 cm tall.
Office chair sizes
Width is across the base, so it is the floor space the chair needs; height runs from the lowest to the highest gas-lift setting.
| Office chair | W x D x H cm |
|---|---|
| Zylo, mid back | 73 x 47.5 x 91.5-99.5 |
| Polli, mid back | 73 x 47 x 91.5-101 |
| Spyn, mid back | 69 x 48 x 100-110 |
| Flexa, high back | 69 x 50 x 118-127 |
Width x depth x height in centimetres, from the size photo of each chair.
Ergonomic features to look for in an office chair
Lumbar support
A curve in the lower backrest keeps the spine in its natural S shape. Sit right back so the curve meets the small of your back.
Seat height
A gas lift lets you set the seat so your feet rest flat and your knees are level with your hips. All four chairs adjust with a lever under the seat.
Tilt and recline
Zylo, Spyn and Flexa recline up to 135Β° and lock in place, so you can lean back during a break and sit upright again to work.
Armrests
Fixed fibre armrests on the mid back chairs; dual adjustable armrests on Flexa, which can be set level with the desk.
Headrest
Useful if you lean back often. Flexa has one that slides up and down.
Mesh back
Mesh lets air through, which matters in Indian summers; a fabric-covered foam seat stays soft for hours.
Wheels and base
A metal base with five 50 mm castors spreads the weight and rolls smoothly on tile, wood and marble floors.
Weight capacity
Each chair is rated for up to 90 kg and suits people from 5 ft to 5 ft 10 in tall.
Choosing a study chair for students
Most study tables are 72 to 76 cm high, so the chair seat should sit roughly 25 to 30 cm below the desktop. That puts the forearms flat on the table without lifting the shoulders.
Spyn has the lowest seat, 40 to 50 cm, which helps shorter students and lower desks. Zylo and Polli go up to 56 and 57 cm for taller users and higher desks.
Chair for a study table
Before buying, check that the armrests slide under the desktop when the chair is pushed in, so it does not block the walkway in a small study room.
How to set up your office chair
1. Raise or lower the seat until your feet are flat on the floor and your thighs are level.
2. Sit right back so the lumbar curve meets the small of your back; leave a gap of two or three fingers between the seat edge and the back of your knees.
3. Pull the chair in until your elbows rest at about 90Β° with your forearms on the desk.
4. Keep the top of the screen at or slightly below eye level, about an armβs length away.
5. Use the tilt lock for breaks, then lock the back upright again when you return to work.
Office chair price
Bluewud office chairs cost between βΉ5,999 and βΉ10,299:
Office chair price list
| Chair | Price | MRP |
|---|---|---|
| Polli mid back mesh chair | βΉ5,999 | βΉ10,999 |
| Spyn mid back mesh chair | βΉ6,199 | βΉ11,999 |
| Zylo mid back mesh chair | βΉ6,299 | βΉ10,999 |
| Flexa high back chair | βΉ10,299 | βΉ18,999 |
Prices as of 20 November 2026; the product grid above shows live prices and stock.
Assembly, warranty and care
Each chair arrives in parts: the base, castors, gas lift, seat and backrest, with the hardware and an illustrated guide. Most people put one together in about half an hour, or a carpenter can do it.
Every Bluewud office chair has a 2-year warranty against manufacturing defects.
Keeping the chair in good shape
Wipe the frame with a damp cloth, vacuum the mesh now and then, and check the bolts under the seat every few months. Do not stand on the chair or sit on the armrests.
Office chair questions
Answers come from our product specs. Each product page has the exact details for that unit.
Which office chair is best for long working hours?
A chair with lumbar support, a breathable mesh back, adjustable seat height and a tilt lock for breaks. Zylo, Spyn and Flexa have all four; Flexa adds a headrest and adjustable armrests.
What is the difference between a study chair and an office chair?
Very little in a good chair: both need lumbar support and height adjustment. Study chairs are often chosen for a lower seat, such as Spyn at 40 to 50 cm, to suit students and lower desks.
Should I buy a mid back or a high back office chair?
Mid back chairs support the lower and middle back and take less space. A high back chair with a headrest, like Flexa, also supports the shoulders and neck when you lean back.
What seat height do I need for a study table?
About 25 to 30 cm below the desktop. For a standard 72 to 76 cm table that is a seat at roughly 46 to 50 cm, with your feet flat on the floor.
Do Bluewud office chairs have lumbar support?
Yes. All four chairs have a curved lumbar section in the mesh backrest.
Which office chairs recline and lock?
Zylo, Spyn and Flexa recline up to 135Β° and lock at the angle you choose.
Are the armrests adjustable?
Flexa has dual adjustable armrests. Zylo, Polli and Spyn have fixed fibre armrests.
How much weight can the chairs take?
Each chair is rated for up to 90 kg and suits users from 5 ft to 5 ft 10 in tall.
Do I need to assemble the office chair?
Yes. The chair comes in parts with the hardware and an illustrated guide; assembly takes about half an hour.
How much does an office chair cost?
Bluewud office chairs cost from βΉ5,999 to βΉ10,299, each with a 2-year warranty on manufacturing defects.